New Member from Milwaukee
-
I dont know what happened to my intro pictures, but I do have a little update. I missed out an a clean E30 a few weeks back because of some bad timing, but did pick this up.
2000 540i 6 speed with a m5 interior swap, coil overs, rims, racing seats, and some light engine modifications. Car was rear ended so I got it for a pretty good deal considering all the parts included. Engine runs great, compression checked out, and the tranny shifts smooth.
Now I just need to find a clean E30...
-
Picked up an absolutely rust free 1991 318is 5 speed from out of town this weekend. Paint needs some attention and it needs a driver side front fender. Interior is pretty good though all things considered. Cant wait to start cleaning it up.
Here is a pic with the 540 behind it.
-
http://wedophones.com/BMWManualsLead.htm
See if what you need is on here, these are all factory electrical manuals. Very thorough.
-
http://www.bmw-planet.com/diagrams/release/us/
Try this for the e39 diagrams.
-
I may be parting out the entire E39 so that I can get a pre 99 non vanos to make this whole swap easier.
Haven't decided yet, but if I do I will have a perfectly good M62tub44 and 6 speed for sale.
On that note if anyone comes across a pre 99 540i preferably e34 manual with decently low miles let me know - thanks.
-
What type of modifications were done to the TUB engine? Just the intake and valve cover powder coat?
-
Pulled the motor/trans/wiring and sold to a HipMF on here. Thanks again for stopping by!
I have the M62 motor and 6 speed trans on hand.
Still need to:
Clean the engine bay
Get the driveshaft shortened
Decide if I am keeping the AC
Remount the brake booster (apparently one of the hardest parts of the swap
I sold the beige seats and bought some black ones which means I need to do the full black interior swap, but this is secondary since getting it running is priority #1
Figure out how I am merging the E30 body control unit with the E39 ECU/EWS/BCU
Wire the E39 EWS in line with the E30 ignition switch so it looks stock
Decide if I am keeping the stock steering rack or going to a Z3 which most people do
Probably changing up the rims
Probably keeping the 4.10 since I decided to stick with the 6 speed instead of the 5
I keep getting surprised by how clean this car is though. I am thinking about getting the whole thing painted after the swap and keeping it for a while.
My current problem is the E39 I am 100% parting out is still in my garage and I need to clear it out so I can swap the 1998 motor while it is in the garage. I have had a lot of interest, but nobody has pulled the trigger. I am keeping it in there until the drivetrain is sold.
-
Always hear good things about A1 Driveshaft but don't have experience with them. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB0QFjAA&url=http%3A%2F%2Fa1driveshaft.com%2F&ei=bdnSU4WUNcmWyASFnYG4BA&usg=AFQjCNE2ZyV6ylgEBZ9XFvyiJNb0lgppYQ&sig2=aRQe2LsEWZ8zYDN0imf1iA&bvm=bv.71778758,d.aWw
-
I forget whether your e30 was an auto trans? If it was then you could splice into the start circuit where the starting relay is above your knees when sitting in the drivers seat. If it was a manual then it goes straight from the key to the starter, not sure of the exact routing though, might be black w/ a yellow stripe IIRC, decent sized wire too, 14-12g. Not sure how good with electrical diagrams you are but I can help if needed, I am an industrial I&E tech.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login