E28 SETA Build

[jc43089]

With balls big enough you don't need one.

[KaiserRolls]

jc43089 said:

With balls big enough you don't need one.

southpark comes to mind

[RamRod E28]

Chillax I do have a seat guys its just laying in the back seat. the drivers front seat install is the very last thing to do to let me know that the car is running and driveable.

[B C]

but what if its not, what if in a haze of mid-grade petroleum fumes, you rush to the passenger compartment to go for your initial drive, forgetting that there is no seat, and lob yourself into position only to crush your twig-n-berries on the formed hump in the unibody.

I don't get the feeling that you are considering all the possible scenarios here.

and for that i give this thread a 1 star rating

[RamRod E28]

Dafuq is this thing??? http://www.stanceworks.com/forums/showthread.php?t=24047 and snap... pleezzzz vote up a little those 3 stars make me feel insufficient

[jc43089]

^Dat's crazy right there!

[Earl]

Cool idea, terrible execution.

Did you ever see this one? 

BMW never offered even a concept, but there were a few companies that did touring conversions.

[DrLeadFoot]

Earl said:

Cool idea, terrible execution.

Did you ever see this one? 

BMW never offered even a concept, but there were a few companies that did touring conversions.

This is sex.

[RamRod E28]

So the e28 touring is a myth I've seen that one and I would trade almost everything I own to get one!!!

[Earl]

There was indeed never a factory one offered, but some companies would take your new e28 and convert it to a touring (their design of course).

[YoungCR]

That "thing" looks like a horrible Caddilac hearse conversion...

E28 tourings are no myth but they are the unicorns of E28 models. Schulz was a tuner back in the day that also did coach conversions like what Bauer did with E21's and E30's. Less than 100 were made and I haven't heard a number on how many are still around. Fun fact they also made E24 6 series cabrios!

[Earl]

CYoung said:

That "thing" looks like a horrible Caddilac hearse conversion...

E28 tourings are no myth but they are the unicorns of E28 models. Schulz was a tuner back in the day that also did coach conversions like what Bauer did with E21's and E30's. Less than 100 were made and I haven't heard a number on how many are still around. Fun fact they also made E24 6 series cabrios!

There is a 6 series cabrio in back to the future remember=P 

[RamRod E28]

Holy shit!!! I gotta look for that in part II

[YoungCR]

Yeah i didn't catch it the first time either, although it is a euro spec car the car was chopped at the prop house for the movie. http://jalopnik.com/5067674/man-restores-griff-tannens-hover-bmw-from-back-to-the-future-2

[jc43089]

Here are the dimensions for the holding tool.  25.4mm in an inch.

http://www.bimmerfest.com/forums/showthread.php?p=5300454

[RamRod E28]

Almost everything is put back together!!! But... She will start right up and instantly die??? Any ideas?

[jc43089]

Fuel not primed, my e30 took forever to start after draining the fuel, pull out the fuel pump relay and use a jumper wire to run it for a minute.  I think the pump only runs a few seconds and it takes forever to get the air out of the fuel rail.

[jc43089]

Here are some pics of the thermostat housing repair.  The nipple for the throttle body heater was corroded terribly so I drilled it out and tapped it 1/8 NPT.  If this happens to you and you want to keep the throttle body heater you can get an 1/8 NPT to 3/8" nipple fitting and thread that in.

[bfinley]

Burn out videos ?!

[jc43089]

We got some flyby videos last night, Mikes dad was running the camera.  It runs very well.  Pulls like a boss.