My new 1995 540i/6
-
Why not remove the Dinan exhaust and sell it since it should be worth some money. Then either find a stock exhaust and hack it up or have one welded up? Idk if the exhaust routing is the same for our cars but if it is I would trade you my stock exhaust for the Dinan
-
Dominic's 540 with "muffler delete" sounds amazing.
Im a fan of electronic cutouts, it would be a nice option.
I am worried that the exhaust I am making for my car (just a 14" long resonator) is going to be stupid loud
Glasspack/resonator pretty much the same thing. Have you heard Mikes e28? That's all we put on his car, the glasspack is about there the cats were, and then single pipe out the back. It would be a little loud as a DD if you had a long commute but not too bad.
-
nope, have not heard mikes car, now he is obligated to post burnout videos.
The hope is that the snail acting as ~1/3 of a muffler (rule of thumb) will help it become more acceptable.
A stock Neon SRT4 is probably my ideal volume level and they have just a resonator, cat, and turbine as far as I know
-
nope, have not heard mikes car, now he is obligated to post burnout videos.
The hope is that the snail acting as ~1/3 of a muffler (rule of thumb) will help it become more acceptable.
A stock Neon SRT4 is probably my ideal volume level and they have just a resonator, cat, and turbine as far as I know
Yes, hopefully next Tuesday we make some more progress on getting an engine and trans in it. Then it's burnout time!!
-
Dominic's 540 with "muffler delete" sounds amazing.
Hopefully Dominic will chime in but since I've ridden/driven his car I can attest to it being very quiet on the highway and during city driving since the stock resonators are still in place. Check out the videos he posted on his gopro mount thread.
I've heard Mike's 528e too and it sounds good too.
I agree with Earl, even though the Dinan exhaust might be tired it still could be sold and a stock catback would be a good candidate for a muffler delete.
-
Dominic's 540 with "muffler delete" sounds amazing.
Im a fan of electronic cutouts, it would be a nice option.
I am worried that the exhaust I am making for my car (just a 14" long resonator) is going to be stupid loud
I would like to hear what he did to his system as well. Chris showed me videos though and it is great.
you and all your neighbors will soon learn to hate your car. straight pipe was cool on my car for exactly 2 days, then the highway drone drove me crazy.
dont just hack off your exhaust because you want more sound but can't afford to do it correctly.
This is true, I can always see what it is like though, the cats and resonator would still be on so maybe it wouldn't be to ridiculous. Money is also a factor too, I don't know what my funds will be like this summer for sure.
Why not remove the Dinan exhaust and sell it since it should be worth some money. Then either find a stock exhaust and hack it up or have one welded up? Idk if the exhaust routing is the same for our cars but if it is I would trade you my stock exhaust for the Dinan
What exhaust would I be trading mine for or off of what car? That would be easier then selling it but I would be nice to have the cash to put something into my new exhaust though.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Stock e34 525i exhaust. I can't find any threads on people swappung exhausts between 540's and 525's but they do say that they are routed the same way and are very similar. That leads me to believe they would swap fairly easily. We can get together some time and look at them side by side.
-
Stock e34 525i exhaust. I can't find any threads on people swappung exhausts between 540's and 525's but they do say that they are routed the same way and are very similar. That leads me to believe they would swap fairly easily. We can get together some time and look at them side by side.
I believe the 540 has a duel 2.25 all the way back and the 525 is probably only a single. They look similar from the realoem diagrams but not exactly the same.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Hopefully Dominic will chime in but since I've ridden/driven his car I can attest to it being very quiet on the highway and during city driving since the stock resonators are still in place. Check out the videos he posted on his gopro mount thread.
I've heard Mike's 528e too and it sounds good too.
I agree with Earl, even though the Dinan exhaust might be tired it still could be sold and a stock catback would be a good candidate for a muffler delete.
I have no real issue with any drone or resonating except at ~1800-2000RPM. Even then, it is by no means unbearable. After I cut off the muffler I did not put a straight pipe in its place. If I were to do that, I am almost positive that the resonating would go away completely.
I would like to hear what he did to his system as well. Chris showed me videos though and it is great.
I am not sure how the exhaust is routed on the e34, but for mine it was very simple. All that I removed were the two scuba tank like mufflers at the rear of the car. (Cut it with a sawzall about 4" beyond the rear axle if I remember correctly.) I still have the cats and resonator in place. Eventually, I plan to extend the pipe to the back of the car, just haven't gotten around to it.
-
someone said:
I am not sure how the exhaust is routed on the e34, but for mine it was very simple.
Looking at realoem again the systems look pretty different. When I get home I'll probably end up cutting off the rear muffler and seeing how loud it is. If its to much then I'll throw a magnaflow on there or something, maybe a dynomax vt. Can't do anything for another month and a half still.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Why not find a stock exhaust and hack it up? Cutting up a perfectly good Dinan exhaust doesnt make sense to me. Especially since there are more e34's in the junkyard than on the road and you could score a catback off of one of those for way cheaper than you could sell the Dinan
-
Even to make a temporary custom exhaust costs almost nothing, Mike and I made a full custom exhaust for his e28 and the only expense was 30 bucks for a glass pack and 15 for a shiny tip. There are plenty of guys over there that could weld something together for you.
-
What John said my e28 sounds nasty and all we used is was 2 old exhaust systems and i can be safe to say that my e28 is the only one with a custom x pipe with cat delete and only a glasspack with a truly centered twin chrome tip setup!
1984 BMW 528e - SETA and manual swapped! M50 to come!!!
1988 BMW 528e - Need parts?
1991 Chevy C1500 (mighty 350 with TBI and Wisconsin weight reduction package)
1996 Mazda Miata (SOLD!!!)
1996 BMW 325i (Donor car)
1998 Chevrolet Corvette (BEAST)
2001 Jeep Grand Cherokee (BROKEN)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login