My name is Earl, and I have a Stainless Steel bolt fetish =)
-
Usually welders want women. Thats why I'm not so quick to hire them. Might want to prep the GF.
hahahahaha He is a good friend. Hopefully he wouldn't try and pull that=P
Looking good - spring is gonna be here fast!
I know=( Being one handed really kills productivity.
-
Since I am going through the trouble of making almost everything new, I am going to tackles front hubs.
I have been looking around to see what's available and have seen a few interesting things.
The cheaper ones use a rougher casting that requires less machining. I am unsure of the bearing quality, but I am sure they aren't as well made as the more expensive ones.
I am stuck between these two on ECS Tuning:
http://www.ecstuning.com/ES2091579/
http://www.ecstuning.com/ES10373/
The top one is an example of the cheaper casting, but I am unsure of how well it does the job.
I am thinking I should play it safe and buy the more expensive SKF assembly. The thing that gets me is the $80 price difference for a pair. Are the SKF assemblies going to outlast and out perform the MTC assemblies enough to justify higher price tag.
-
I never cheap out on bearings, especially on something that might see -69 degrees of camber.Â
You CAN however, find quality bearings for a decent price if you look hard enough.Â
but,
YOLO and you may have good luck with the MTC stuff so this whole post is pointless.
-
what exactly needs to be machined.
Nothing. I am just talking about how they were manufactured. You can tell by the back of the hub.
I never cheap out on bearings, especially on something that might see -69 degrees of camber.Â
You CAN however, find quality bearings for a decent price if you look hard enough.Â
but,
YOLO and you may have good luck with the MTC stuff so this whole post is pointless.Â
My thoughts exactly. haha I may get the SKF just for the peace of mind=)
-
Just ordered my rotors from Adams Rotors. I cannot wait to see the quality and I hope they last a long time.
I need to pull together another parts list to combine with the front hub order. I will take care of that this weekend. I cannot wait to have both hands again=)
-
-
You're so HANDY Earl!!!
-
Didn't get much of anything done on the compact this weekend but I do have pictures.
My friend wasn't able to make it out to work on the bay so I decided to just quick stop by Sunday.
I got this guy installed:
I also rounded up a few things I want to get powdercoated:
The dust shields are coming off of the knuckles because they are shot and I won't have much use for them=)
I also took some pictures of being aired out on the 15's. It just looks funny with how sunk they are.
-
Looking good as usual Earl!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login