Build Thread?
-
V8 plans have been abandoned, and a (different) m50 is going back in it....
It will also contain one of these...
-
YES!!!
No, but I thought that the video was amazing.
-
I am actually glad I sold the m50, things worked out really well for some odd reason.
And at this point I think I will be constructing myself and MS2 setup.
-
GunMetalGrey said:
I am actually glad I sold the m50, things worked out really well for some odd reason.
And at this point I think I will be constructing myself and MS2 setup.
Just throwing out a heads up on the MegaSquirt II set up, I want it for my boost build. But thanks to TJ, and my searching, you won't find too many people around here that like to tune it, sadly... =\
-
And that's why tuner studio is awesome, you can get a decent street tune going with it. A friend of mine has a boosted miata on ms3 with tuner studio, and damn it built a real decent tune within hour two hours of driving it. I was very impressed with it.
During this time you can learn enough about tuning to maybe adjust some things with confidence!
-
Brian said:
Just throwing out a heads up on the MegaSquirt II set up, I want it for my boost build. But thanks to TJ, and my searching, you won't find too many people around here that like to tune it, sadly... =\
There is a muscle car shop in West Bend that works with MS. $750 for a full tune: quarter, half, 3/4 and full throttle. (don't quote me on the price) I'll search for the shop. Lost there name in my head somewhere.
    @DrLeadFoot
-
DrLeadFoot said:
There is a muscle car shop in West Bend that works with MS. $750 for a full tune: quarter, half, 3/4 and full throttle. (don't quote me on the price) I'll search for the shop. Lost there name in my head somewhere.
Westbend Dyno tuning? No thanks..
-
So just finished up a nice four hour session on the donor car, I love how on e36's you can just take the whole front of the car off. I realized that and had a nice four year old happy dance moment.
Got most of it done, tomorrow I will take the drive shaft out, take off the exhaust (with any luck) and I think after that it will be good to pull out.
How it sits for the night,
-
I have never been more frustrated before, after about 12 hours of working on cars I gave up.
Got tims (my motor, in his car) running and driving so that was cool.
Went back to the garage to get the m50 out, all was going well until the shifter carrier clip (bitch clip) came up, got the clip swung up but couldn't get the actual pin out. So I brought out the new die grinder and took care of that real quick.
Went to pull the motor out, and after a bit figured out that it hangs up on the steering shaft. The oilpan needs about another inch of room before it will come otu.
After almost throwing a few things I decided it was time to call it a night, and some internet searching revealed that it is almost necessary to remove the steering shaft to get the motor out.
I swear it is easier to take the m50 out of an e30 vs taking it out of the car it is SUPPOSED to be in. That makes little to no sense to me.
And once again, a thanks to the father unit for putting up with me tonight! And all of the cars I have been accumulating!
-
Mine was F'ed up, I seriously had to punch it out the opposite way it should have come out.
Anyway, motor is out.
-
Yeah I saw a few of those, thought about it.
Silly motors really, hard to add power.
Sent from the future. Or my phone, who knows.
-
Got the trans off the motor today, took the clutch and flywheel off and stuck it on the stand!
Also was looking into clutches a bit, I think I will end up getting a clutch masters stage four setup. This would use the stock dual mass flywheel, a six puck rigid ceramic disc and an HD pressure plate. Called them up, guy was helpful and said it would be a great setup for up to 620 flywheel torque, and that the stage three would only be good to 425hp so that would be lame. The pricing is the same between the stage 3 and the stage 4 kit, so why be concerned about not being able to hold the power when its the same price?
$585 for the pressure plate and disc..... shit, this is going to get expensive real quick!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login