Jake's Epic BMW 135i Build Thread! (5+ Years of Ownership)
-
Quite a bulge you have there. On the hood.
-
One hand on the wheel sketches me out
It's not as bad as you might think. There are much faster cars that go down the strip with only 1 hand on the wheel. Having to shift every 2 seconds makes the transition annoying. However, after 140mph, 2 hands is a must
Drop a few psi on the rear tires and flip the air cleaner cover upside down on a jb4 335i (map9) and you could probably hit those speeds.
just sayin.
That is a neat hood. love the updates Jake
Lol. Thanks Brian!
Can’t wait for the details
I filmed so much, just have to edit, upload and write some content!
Quite a bulge you have there. On the hood.
Took some getting used to. I'm not used to looking down and seeing such a large bulge.
-
Quite a bulge you have there.
Took some getting used to. I'm not used to looking down and seeing such a large bulge.
Damn. I wish I could look down and see a slightly smaller bulge.
-
Damn. I wish I could look down and see a slightly smaller bulge.
That'll change when you stop shopping in the kids section and buy pants that fit like an adult.
-
If you haven't already noticed, YouTube and Instagram are where I post most of my content. If you aren't already subscribed/following there, you're missing out
That being said, I have exciting news I want to share! I know Brian already posted a thread congratulating me, but it makes sense to share it here too.
First pass on 20psi ran an 11.29 @ 128mph with a 1.94 60ft.
Second pass on 25psi ran a 10.53 @ 137mph with a 1.73 60ft.
Third pass on 28psi ran a 10.36 @ 134mph with a 1.59 60ft.Log: https://datazap.me/u/suspenceful/1036-13409mph?log=0&data=1-3-4-11-25-26-27-28-29
I actually set a record on my 3rd pass with the 10.36 ET! Currently the fastest manual trans N5X BMW with stock chassis. Ghassan Automotive went 9.6 but they have a custom back-halfed chassis.
I think I can run 9's as I was misfiring during my 10.36 pass, watch the video!
-
To think this could have been the 87 325is on stock tires that was gonna run 9's against @GunMetalGrey's car like we talked about.
I still can't believe those rears fit in the stock arches.
-
I've had a few people reach out to me asking to check back into WIBimmers... and I realized it's been way too long since I've updated this thread. So much has happened since my last update a year and a half ago.
My Instagram and YouTube channel are where I post most of my content. Be sure to follow/subscribe if you're interested in keeping up with my BMW builds!
I'm currently in talks with Billiam Mason (BMB Autowerks) about a built engine. The 135i engine is finally ticking/knocking internally after all of the 750+whp abuse. My goal is to get something that can handle 900whp and maaaaaybe throw a bigger turbo on it. He recommended a 6875 Gen 2.
Here are a few pictures/videos to enjoy.
-
Nice, that n54 is going to be insane
-
Wrap the exposed harness in some Tesa tape
-
-
I'm resurrecting myself from the dead...
-
Nice video Jake and good luck with your channel, you have my support
-
Nice video Jake and good luck with your channel, you have my support
Thank you man! I'm gonna give it my best shot, and appreciate the support.
-
Welcome back! Was happy to see the video pop up in my subscriptions. Excited to keep following your journey.
Feels good to be back on WIBimmers as well, been too long since I logged on lol. Thanks for following along on the tube.
-
Hot off the press, here's what we found inside the engine.
As much as I’d love to build it right, my budget just doesn’t allow for that. On this self-employed journey, every dollar counts! Off to the junkyard to find another stock motor…
-
How much does a used b58 go for?
-
How much does a used b58 go for?
Haha, I like the way your brain thinks.
I'm not sure how much they cost, but I'll be sticking with an N54 for this. But I would like to build a B58 car one day.
-
Nice work on the channel. Looks like you found the 1st failure mode(internal) on the N54. Now slap in some H-beam rods in the next one and find out where is the next failure mode.
I'd say the N54 is living up to the hype of "the German 2JZ". 800+whp on a stock motor that was 250ish stock.
-
Nice work on the channel. Looks like you found the 1st failure mode(internal) on the N54. Now slap in some H-beam rods in the next one and find out where is the next failure mode.
I'd say the N54 is living up to the hype of "the German 2JZ". 800+whp on a stock motor that was 250ish stock.
Thanks! It's crazy what this thing handled. I'm going to keep this engine to build over time, and get a stock, unopened N54 from a junkyard or something to get it back on the road for spring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login