New build! E90 M3
-
Looks great
-
Milestone hit! The car crossed 90k this past weekend! I also got my new tires installed yesterday, thanks again @SteelBluefor hooking me up with Vredestein!
First impression of the tires when I saw them was "Yup, looks like an all season." The sidewall looks nice and the tread pattern looks good. Lot's of locking squiggles in the tread blocks to help dry performance and reduce flex in the tread blocks. I took them on my shakedown route and they performed better than I expected for an all season tire! These provide more grip than anyone needs on the street. Pushing them at pace on the road they never felt like they were going to give up grip. Coming hot into a roundabout and the front pushed a little as I made the quick steering input from right to left but it was predictable for this car and caused no brown moments. The rear grips just fine coming on the throttle out of corners and didn't display any unexpected oversteer. The ride is comfortable but I wouldn't say it's any better than the Pzero's I took off which is to say both tires were competing with my exhaust for noise level so it's irrelevant.
If you are driving past this tires limit on the street then you're driving like an asshole. I'll run them at a track/autox just to see how they handle but I have no expectation that they'll be on the same level as the Pzero or PSS.
-
New wheels, tires and suspension loading...
-
New wheels, tires and suspension loading...
This message sponsored by Fitment Inc.
-
This message sponsored by Fitment Inc.
The job has perks!
-
New wheels, tires and suspension loading...
Plz no esms or rotiforms
-
Plz no esms or rotiforms
Both companies meet or exceed load certifications that are voluntary in the U.S. and Rotiform specifically makes a line of motorsport quality wheels. So other than being heavy and having nthe perception of being "fake" wheels I don't see an issue with either. It all boils down to purpose. Street use? Both are perfectly safe for any street loads. Track use? Maybe go with a lighter weight option.
-
Sorry for the delay, it's been a busy few weeks for me. We've had a lot going on at work and at home lately!
I got my wheels hand delivered by @SteelBlue last week and promptly got them installed! They are Artisa Elder's running 19x9.5 et35 and 19x10.5 et25 with Yokohama Advan Sport+ in 255/35r19 and 275/35r19. The wheels are .5" wider than my stock ZCP wheels. The offsets make them slightly more aggressive than the ZCP wheels but not as aggressive as I wanted so I'm running the same 12.5mm rear and 15mm front spacers I had on the ZCP wheels which makes it about a half inch wider than the old set up. The picture makes it look like the rear is cambered in but it's a weird angle in the picture.
I have a set of ST XTA +3 coilovers on the way to replace the OEM 93k mile struts/shocks. The goal isn't to lower the car more just refresh the current set up and dial in the ride and handling.
-
I really like these and It's pretty rare that I like newer aftermarket wheels.
Thanks! I was cautious about going with anything that wasn't the OEM ZCP wheel because I love that design so much. Artisa is one of our wheel companies at work and knowing the guys who designed and engineered it made me feel good about putting them on my car. They meet or exceed the most recent SAE J2530 standards. Those tests are performed independently by SAE so we can't self certify.
Knowing this, when the opportunity popped up for me to have the first set made for an M car and one of the first BMW sets made at all I was thrilled! Especially this design! I also forgot to mention, this wheel/tire combo is about a 1lb lighter per corner for a wheel that's a .5" wider with the same size tires!
-
I got my wheels hand delivered last week and promptly got them installed!
*cough*
-
Crazy that I hated that design on every other car they were put on. Then you throw them on your car and they look pretty damn good. Hard to beat the ZCPs tho.
The ZCP is an all time great but I wanted to try something new for a bit. That and they need some refinishing so this is a good substitute for now.
-
Sorry for the delay, it's been a busy few weeks for me. We've had a lot going on at work and at home lately!
I got my wheels hand delivered by @SteelBlue last week and promptly got them installed! They are Artisa Elder's running 19x9.5 et35 and 19x10.5 et25 with Yokohama Advan Sport+ in 255/35r19 and 275/35r19. The wheels are .5" wider than my stock ZCP wheels. The offsets make them slightly more aggressive than the ZCP wheels but not as aggressive as I wanted so I'm running the same 12.5mm rear and 15mm front spacers I had on the ZCP wheels which makes it about a half inch wider than the old set up. The picture makes it look like the rear is cambered in but it's a weird angle in the picture.
I have a set of ST XTA +3 coilovers on the way to replace the OEM 93k mile struts/shocks. The goal isn't to lower the car more just refresh the current set up and dial in the ride and handling.
Are they directional side to side? IE; does the spoke direction "twist" the same on the drivers side?
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Are they directional side to side? IE; does the spoke direction "twist" the same on the drivers side?
They are! There is a left and right wheel set.
-
They are! There is a left and right wheel set.
EPIC! That's a big pet peeve of mine about directional wheels. If they only go one direction, they look dumb on the "wrong side"
Awesome man, im stoked on these for you!
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
As @Rekpointsaid, I have yet to see a car I liked these on. But they look so good on your car. I am very excited to see this in person!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login