E46 Touring Life
-
Front accessories mounted including the underdrive pulleys that came with the B30 engine. Working on replacing some rusty exhaust flange studs from the headers and slowly marking all electrical plugs before pulling the manifold off the old B25. Trying out some metal rescue rust dissolver. Letting it sit 24-36 hours and seeing what it does.
-
The metal rescue rust removal bath worked great! The exhaust manifold studs came out looking like new and the broken downpipe studs were cleaned enough to be able to be heated with a torch slightly and air hammered out with ease. I will just use a nut/bolt combo for the downpipe flange connection to make things easier. Exhaust manifolds back on the engine with new gaskets and upstream o2 sensors. Also installed the SAI block off plate on the engine as well as I dont plan on putting that back in.
I started breaking down the passenger front axle due to a torn inner cv boot. Just gotta fill that back up with grease and clamp new boot on, then reassemble.
Also started getting the clutch lines and new slave cylinder squared away.
Replaced driver side engine mount and the old one was squished down pretty good. Surprised there wasn't any cracking in the rubber.
Then moved onto the dreaded intake manifold rats nest. I wanted to move everything that I could over from the B25 engine since I know that stuff worked well. Found a torn intake boot on both engines in same location (this could explain my misfire issue on B25). Will be ordering new boots along with new intake manifold gasket. I took my time marking every hose and electrical connector with different color paint markers while transferring things over to the B30 manifold. Hopefully this makes things a lot easier for reinstall.
And all done.
Anybody looking for an M54B25 to buy? Would be nice to get it out of the garage, so I can pull the Z3 Coupe out to stretch its legs.
-
Did you use metal rescue on the aluminum stuff like the pulleys, Vanos unit & oil filter housing? Or was it that clean to start?
Those were all degreased, blasted and powdercoated silver.
-
Anybody looking for an M54B25 to buy?
DM sent. Still have my compact sitting here with a blown headgasket...
Where'd you get a deal on the 3L? Do they have more?
-
DM sent. Still have my compact sitting here with a blown headgasket...
Where'd you get a deal on the 3L? Do they have more?
It was a guy on craigslist in Trevor, WI, close to IL border that had a couple storage garages full of parts. He's always parting out different bmws and has parts galore. I can look at CL again and see if he has another post to get contact info.
-
DM sent. Still have my compact sitting here with a blown headgasket...
Where'd you get a deal on the 3L? Do they have more?
I like where this is going
-
White-ish Bay. So fresh and so clean
-
DM sent. Still have my compact sitting here with a blown headgasket...
Where'd you get a deal on the 3L? Do they have more?
I have a feeling it was this guy.....
https://chicago.craigslist.org/nch/pts/d/trevor-bmw-330i-330xi-parts-part-out/7279203117.html
-
White-ish Bay. So fresh and so clean
Isn't that where @DrLeadFoot lives?
-
White-ish Bay. So fresh and so clean
That cleaned up really nicely!
-
I guess I never paid much attention, but the front subframe on AWD cars is quiet different.
Yeah it's a heavier beast for sure.
-
That cleaned up really nicely!
Thanks! I give credit to a friend of mine who enjoys cleaning. Me, not so much, lol.
-
Thanks! I give credit to a friend of mine who enjoys cleaning. Me, not so much, lol.
I have been over here ready with toothbrush and Simple Green waiting for an invite to the cleaning party.
1000 shop towels later, It looks so good
-
I have been over here ready with toothbrush and Simple Green waiting for an invite to the cleaning party.
1000 shop towels later, It looks so good
Lol. Chris was working on his motorcycle this past weekend. Out of nowhere he stopped, walked over to the engine bay and started cleaning it. I wasn't going to stop working on the intake and cv axle to stop him.
️ -
Lol. Chris was working on his motorcycle this past weekend. Out of nowhere he stopped, walked over to the engine bay and started cleaning it. I wasn't going to stop working on the intake and cv axle to stop him.
️lol. @The Full Banana is the same way. Put a cleaning product and towel in his line of sight and he can't resist the urge to start cleaning engine bays.
-
Ran into a snag with the broken control arm bolt stuck in the car frame from one's the previous owners. Have tried drilling it out and using extractor with no luck. Next step is heating with propane torch and quenching with wd40 to see if that breaks it free with extractor. If not, guess it's drilling out to bigger size, retapping, enlarging hole on control arm mount and bolting it in with bigger bolt.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login