chit chat thread
-
FYI 6' panels wont save you any tape joints, unless your walls happen to be over 8' tall. youll still have one joint somewhere in the middle of every vertical section. if your framing is studs, you cant install them sideways either, as studs don't fall on 6' centers. you might save material cost, i guess. also do you have a trailer big enough for 12' panels?
i have idea that might work in theory but not practice: score an 8' in the middle, carefully fold it in half and carry it down. unfold, glue the seam from the backside and install. if the paper on the not-cut side survives, you could save yourself the joint.
It’s not framed yet. I’ll be doing that and will be framing 24” OC. And it will have 9’ ceilings.
6’ panels would give me fewer joints overall. I only have a 4x8 trailer, but I went on Menards and it was only $84 to deliver the drywall. Worth it IMO over taking the time to load and unload 20 some sheets.
But your idea of scoring it and folding it in half to get it down is worth a try as well.
They’ve since dry walled the stairway, but that’s the basement. New utility room and we had them rough in a full bath too.
-
Almost looks like a basement I could walk through without hitting my head on something
You have no idea. The original part of the house was built in 1900. My wife and I are 5’6” and we could JUST barely walk through the original basement without hitting our heads on the joists. I grew up in old houses, too. This is my first basement where I can walk freely without worrying about hitting my head.
I circled where you can see the old part of the house in the new basement and the blue line is the bottom of the house/basement.
-
It’s not framed yet. I’ll be doing that and will be framing 24” OC. And it will have 9’ ceilings.
6’ panels would give me fewer joints overall. I only have a 4x8 trailer, but I went on Menards and it was only $84 to deliver the drywall. Worth it IMO over taking the time to load and unload 20 some sheets.
But your idea of scoring it and folding it in half to get it down is worth a try as well.
They’ve since dry walled the stairway, but that’s the basement. New utility room and we had them rough in a full bath too.
wow, would have never expected 9' basement walls. in that case, scoring is pointless and 6' panels would be perfect.
Dan
-
wow, would have never expected 9' basement walls. in that case, scoring is pointless and 6' panels would be perfect.
I think it was required. I remember pushing for shorter basement walls to save money, but I think they ended up being this size because of how the engineering came out. Idk.
-
These are some neat projects. We finally finished out basement as well. Bought the house 7 years ago. Basement was sorta finished, but just very white-box-ish. So after a couple years we added a bathroom, then demo'd the rest, then it sat until the end of last year. Finally got moving and finished it.
Basically how it started last year....we have pics of what it looked like when we moved in somewhere. The whole ceiling was dropped and had conduit everywhere. In these pics, the ceiling is gone and I relocated all the wires into the joist like they were supposed to be.
Here I have a bunch of the bar framed in and the plumbing pretty much done. Had to dig a sumpcrock into the floor then route everything overhead. I hired someone to do the framing but did the electric and plumbing, just to keep the project moving.
Ran a second zone of HVAC too.
Opened up the stairwell and added stair lights.
Exercise was staying the exercise room so it became a temporary home to a lot of crap
It was not fun getting things down the stairs, but having it opened helped A LOT
The movie room stayed the movie room but we had to fix the back wall (left side in pic) and the ceiling got insulated and painted black.
I hired out the drywall too.
Movie room sucessfully blacked out
Decided to add some stone walls:
The wifes design pallet
It was a long wait on the cabinets, but they started to roll in.
Tin/copper ceiling was tricky
Then added more stone and more tin:
Then the big wait was for the counter tops. So we finished a bunch of the other stuff
Finally the tops came in so we could finish the back-bar....more stone and cabinets. Haha
Movie room got furnished
Appliances
Crown to finish off the ceiling
Finish work on the stairs
Then....the coolest part. We unpackaged everything we had been storing for 7 years from our old house.
Got it all organized. Installed my lights and shelves in the towers.
We are still working on some things. Decorations. I want to build a bar sign for between the 2 towers. It was a fun/stressful/rewarding/expensive project.
-
Gentlemen,
It has come to my attention that there are some among us who have fallen on hard times and need a bit of support while their circumstances improve.
Starting today, we will be collecting non-perishable food items for the @REKIII family. Donations can be made in person at the Black E46s of New Berlin satellite office
2860 S 108th St,
West Allis, WI 53227
*please no more than 3 dented cans per donation. Bulged cans must be within 10% of their original diameter.
-
Did a ton of work ourselves which saved a lot. We had a major and 2 smaller vacations canceled so we had a little boost to the budget which was nice.
Wife uses her fancy wide angle lens to take the pics so it looks bigger than it is.
The stone on the wall looks really good. Almost like a nice restaurant feel. Im not sure I ever remember seeing that done before but I like it a lot
-
The stone on the wall looks really good. Almost like a nice restaurant feel. Im not sure I ever remember seeing that done before but I like it a lot
Thanks. It was an inexpensive menards product. I cut it on a chop saw with a masonry blade. I used 'omnigrip' from home depot to put it on the wall. No grout. A pretty nice and easy install considering I had never done it before.
-
WiBasements.com
Suggested website name change -
WiBasements.com
Suggested website name changeCalm down pal, WiBoomers takes precedent
-
-
It is a dry stack stone. Used indoors, it doesn't need grout to be a façade. However I did add the mesh to the wall (you can see it in the one pic with the window) to ensure good adhesion. Supposedly I didn't need to do this, but it made me nervous just sticking it to the drywall.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login