A purists nightmare - E46 drift build

Tkuhn

straight6pwr said:

the low speed of this track sure makes collisions like this safer.

do you get extra points for being so close to each other or is that just part of the fun?

All of what we do is purely for fun. There is a competitive side to drifting but that's not what we do. Grassroots drifting is much different from competitive, and so is the operating cost lol. So yes we are literally putting money up in smoke

KaiserRolls

straight6pwr said:

the low speed of this track sure makes collisions like this safer.

It’s low speed when you’re sideways.

@TkuhnGlad and you guys are alright! Cars can be fixed.

@Boris3 don’t worry the guy is wearing yellow he is impervious to cars

Tkuhn

KaiserRolls said:

It’s low speed when you’re sideways.

@TkuhnGlad and you guys are alright! Cars can be fixed.

@Boris3 don’t worry the guy is wearing yellow he is impervious to cars

For the record everyone, the last speed I could see on my helmet cam was 35mph. Which is off the front wheel so its true speed not spinning wheel speed.

Tkuhn

Got the girls unloaded from the trailer. Little battered and bruised from this year but we have all winter!

In the above photo you can see how Sam's front end is shifted if you look at the front tires.

and here's some more detailed photos of the damage to my car.

VID_30031127_163247_054.mp4 VID_30051214_055449_477.mp4

Attachments:

Tkuhn

UPADATE!

Been fairly quiet, snagged up a mint ass center exhaust bracket while at the junkyard.

Also got a sweet intake off amazon lol will post photos once installed but its really well made for $140 and is basically a AFE replica. Pretty amped on it.

AND SOME GREATTT NEWS!

I cannot thank @Sam_Holzmann and his dad enough for the transport to and from the body shop.

The car is back at the shop and STRAIGHT!

Now this was done as a side job so all we had them do was pull the quarter straight, hang the door and get the metal as close to where it originally was.

Some putty work and paint to seal it and we are in business!

SUPER excited to be able to get working on the car again now

B C

How do you salvage the wrap job? Cover the seam with diagonal stripes?

image.jpeg.2c4a9ace6ce02543c37635437c985e6f.jpeg

Tkuhn

B C said:

How do you salvage the wrap job? Cover the seam with diagonal stripes?

Most likely will just re wrap the whole side. I'm not really onto the M stripes haha especially since it's not and M and even if I was it's not really my style

B C

Ah yeah, I was implying some generic kind of stripe, im definitely in agreement over not blaspheming the Motorsport colorband

Rekpoint

Looks like they did a decent job for a drift car!

See.. if you weren't in Wisconsin where there is an off season for drifting you probably would have left it!

Tkuhn

Rekpoint said:

Looks like they did a decent job for a drift car!

See.. if you weren't in Wisconsin where there is an off season for drifting you probably would have left it!

Hahah I'm thankful for an off season, it allows the cars to progress and get the refreshing they need. And honestly I absolutely HATE the stereotype that a drift car should be smashed and shitty.... that's not how it should be lol the midwest has a pretty good reputation though for having fairly nice built and refreshed cars. Thanks to the off seasons. Drifting is a rolling car show.

Rekpoint

Tkuhn said:

Hahah I'm thankful for an off season, it allows the cars to progress and get the refreshing they need. And honestly I absolutely HATE the stereotype that a drift car should be smashed and shitty.... that's not how it should be lol the midwest has a pretty good reputation though for having fairly nice built and refreshed cars. Thanks to the off seasons. Drifting is a rolling car show.

I 100% agree. If you are not looking good doing it. It shouldn't be done!

Tkuhn

FINALLY got some time to work on the car today. Alone in the shop was something I definitely needed as of recent and it felt great to get my hands on the car again!

First off I gutted the old door to have spare parts if needed. Plus it will make a cool walls hanger.

Not sure if mentioned this but the window didnt break and it was salvaged too.

I did find that the lock was broken when I pulled it from the handle, luckily I found a rebuild kit on amazon for $8 and it has good reviews. Was pretty excited that I dont need to re-key the car. Below you can see where its cracked.

Also washed the car for the first time since October which feels good.

And the plan is to get a proper cage in the car this winter so I pulled out the floor plates and all the dash accessories. Now all that's holding in the dash is the mounting bolts itself.

Lots of work ahead yet but felt great to get back in the shop.

Tkuhn

Update.

Small one, didnt get a whole lot done this weekend.

The blower motor stopped working a week before the last drift day and I finally got around to ordering a new one. We had checked for power before I went and ordered one.

Turns out it wasnt the blower motor so that was a great way to start the day. I'll be ordering a resistor even though I didnt think that was the problem. After reading it seems these resistors aren't the same as normal ones that when all the others I have dealt with work on high only when bad the e46 ones can just take a shit all together.

I moved on to fixing the broken door lock.

Disassembled.

here's the broken/cracked parts.

and the lock successfully assembled and working smooth I did use some of the good original parts over because well they were fine and no need to put some Chinese pieces in. Lol I kept the retainer and the spring from the original lock.

Fron there I moved on to assembling and installing the intake I got. It's from amazon, actually a really nice product and fit. And about half the price of an AFE.

Now the only major downfall of the whole having a real intake thing is that I went full honda boy and shaved all the studs and holes in the engine bay LOL. So now I'll be drilling and having to put in some nutzerts to keep this thing in place haha.

SteelBlue

How much does a shop space like this go for(assuming you are renting)?

Looks a lot nicer(and cleaner) than my current setup lol

Tkuhn

SteelBlue said:

How much does a shop space like this go for(assuming you are renting)?

Looks a lot nicer(and cleaner) than my current setup lol

This is Sam's shop. He is gracious enough to allow me to have my car there this winter. Mostly for some fab reasons. I have space at home for the car which is nice to not have to drive to work on it but I cant do what we have planned at my home garage. Normally it would be at home. My old shop space was about a 3 car that we paid around $250 a month for but I moved out of there when I moved houses and there was room at the new place to work on and keep my car at. So I cant really put a number on it lol. From places that friends have been before though a space this size would probably be $850+ per month.

wasnt m3

I've dealt with a handful of e46s with blower motors inop, every time it was the resistor.

Tkuhn

wasnt m3 said:

I've dealt with a handful of e46s with blower motors inop, every time it was the resistor.

Welp atleast I'll have a new motor and resistor and know it's good for awhile lmao. Just threw me off since there was power at the motor. Based on all my other experiences. I went to school for automotive mechanic and now I'm a diesel tech. Been wrenching for almost 1p years now so I was like oh easy. Lol but bmw outsmarted me

Tkuhn

Update

Finished pulling the dash out of the car after some conversations about the cage placement. Pulled the sunroof and then pulled all the wiring down to separate it. Only going to be running the done light wiring back up after the cage is done.