E46 Things
-
-
Found a video clip of the F80 M3. I called it an M4 in my original post because in my brain an M4 should have 4 doors and the M3 was originally a 2 door. Thanks for rustling my jimmies with your wonky naming structure BMW
-
Interesting, not where I thought the off occurred when you mentioned it. Looks like compared to the prior lap he was into the rumbles on exit from T7, got on the gas while on the rumbles and hooked to the right onto the tire wall.
Text mentions he had the traction control off. Wonder if he had done this from the outset or just for this session. Typically keep the nannies on for folks starting out.
-
BHF looks like a good time
-
Wow. Your head looks huge in that helmet.
-
Gr8 shot
-
Wow. Your head looks huge in that helmet.
-
-
Just noticed the instructor waving! Hahaha!
-
Just noticed the instructor waving! Hahaha!
Yes I didnt notice this right away either. I remember him waving but figured it was just at a corner worker he knew. The instructor was great. Hope to bump into him again in the future.
The amount of 70+ year olds out on track was promising. Makes me feel like there may be plenty of time left in life to play
-
Yes I didnt notice this right away either. I remember him waving but figured it was just at a corner worker he knew. The instructor was great. Hope to bump into him again in the future.
The amount of 70+ year olds out on track was promising. Makes me feel like there may be plenty of time left in life to play
Seeing all of these old dudes at the track has made me decide that I want to be a driving instructor when I retire.
-
Picked up a new daily driver. I will miss the Datsun but the fuel economy was painful and I was ready for something new that had better utility for kid things and bike things.
Time to wash the M and put it away until a freak November warmup happens or Spring comes.
the winter to-do list:
-check/adjust valves
-check vanos bolts
-clean throttles
-replace throttle and cam sensors while the plenum is off
-replace belt tensioner pulleys that have gotten noisy in the last few weeks
-rotate tires side to side
-bleed brakes and clutch
-change oil
-glue C-pillar fabrics
-install the new Injen S54 intake coming out in December
-underdrive pulleys?
- code the brake pad warning light off??
-look for tiny oil leak which is probably the PS reservoir.
-
Actual footage of @SteelBlue bleeding his clutch
-
Valve cover is off to check VANOS exhaust hub tabs , check cam bolts, and valve clearances.
I had to see what I am dealing with first before ordering parts. If an exhaust hub tab is broken its no less than $400 to get back in the game with a used one on Ebay, usually people opt to spend about $600 on a cyro treated hub and another $150 on a modified oil pump disk that prevents future failure.
Everything checks out good so far.
Broken tab shown below for reference (Not mine thankfully). The tab can dislodge, cause timing to jump and cause unexpected meetings between valves and pistons.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login