<![CDATA[Hello. My name is Matt, and I like spending money]]>I'm throwing my hat into the Alpine arena.

It's a CALIFORNIA (!!!) 1990 Alpine 325i Sedan. Automatic, and the M20 has about 260k miles on it + a leaking head gasket. But these are perfect conditions for a M50 5-speed swap.

We picked up this guy around the end of December before Christmas, however with the fact that we have two E34's to attend to and the calypso e30, my project schedule was pushed back a bit

The driver's side of the valance is forked pretty badly, so I'll be swapping that with a brand new one. Other than that, this body is pristine. I don't have any solid pictures of the interior but it has gray cloth seats, which the driver's seat is a little tattered but nothing horrible.

Let's get up to speed:

Dec. 20th, 2016

We found the car on a farm outside of Verona sitting under snow, which we had come to learn had been sitting for quite some time since the guy had a lot of other project cars. But to our disbelief, there is zero rust on the car and it started up immediately after wiping off the snow. Somehow this car sat on Madison Craigslist for two weeks without anyone even coming to check it out?? I swear I thought it was a scam, it was quite literally a Christmas miracle.

17373226102119162637592731262161426o.jpg
 17431681102119162637192722030416395o.jpg17408416102119162515989691035039182o.jpg

Chris survived the drive back on probably the baldest and rotted set of spare tires I've ever seen.

Cleaned it up to get rid of all the salt, cause it'll never be seeing a winter again. 

17430675102119163432412601416099432o.jpg1740818710211916343321262407226746o.jpg

Dec. 22nd, 2016

Since Ben was home from SC for the holidays, we pulled the M50 from a parts 95 E36 325i we had sourced a few weeks prior, which was put out of commission due to the hood flying up and smashing the windshield while driving. The motor was running a week before it was picked up, however it's believed the starter went out, which doesn't matter since I need a new one for the swap. Removing it was a breeze with four people and the core supports sawzalled off. that e36 is mega scrapped by now.

1740835010211916368721897299746675o.jpg1740816510211916370321937738733085o.jpg

17342028102119163715219671101115147o.jpg

Feb. 19th, 2017

The E30 twins currently sit together. I took this the day we got the Calypso M20 running.

Forgot to mention around this time I scored some side skirts from Dan, which you can see leaning on the wall next to the E28.

1743076210211916375402064893450397o.jpg

Mar. 18th, 2017

The M20 pull has begun. Andy stopped by to drop off the set of 15'' Weds Bavaria 4x100 rims he no longer wanted. I think they look fresh as hell, and are a perfect fit for the Alpine.

I'll be looking into powder coating them in the future, but for now they're in perfectly acceptable condition to run. I found a thread on E9 Coupe that pointed out that 68mm BMW center caps fit these guys perfectly, so I ordered a set of them. Very excited to see how they look on the car.

I also picked up a pressure washer today. Hoping to get a good engine bay wash going once the motor is pulled.

17357405102119164316834711105420583o.jpg17430667102119167926124942066589547o.jpg

Here's my WIP parts list so far if you're curious of my plans. I'd tell you that this is for you, but it's actually for me.

https://docs.google.com/spreadsheets/d/1g5PsFmSzEas-rl7x8jwDGZs5WF2SzdOdVU6ErX8QxGI/edit?usp=sharing

]]>https://wibimmers.com/topic/4768/hello.-my-name-is-matt-and-i-like-spending-moneyRSS for NodeWed, 16 Sep 2026 04:53:05 GMTMon, 20 Mar 2017 04:22:10 GMT60<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 23:46:21 GMT]]>Yes

]]>https://wibimmers.com/post/82116https://wibimmers.com/post/82116Tue, 01 Aug 2017 23:46:21 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 23:08:10 GMT]]>

Snap said:

E34 is front sump, all others are rear sump

on the bright side, looks like ya boy here gets to save $60. should i be okay with just the oil pump upgrade?

]]>https://wibimmers.com/post/82115https://wibimmers.com/post/82115Tue, 01 Aug 2017 23:08:10 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 23:02:10 GMT]]>E34 is front sump, all others are rear sump

]]>https://wibimmers.com/post/82114https://wibimmers.com/post/82114Tue, 01 Aug 2017 23:02:10 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 22:55:47 GMT]]>G260 with the sachs m20 clutch kit (https://www.ecstuning.com/b-sachs-parts/clutch-kit/21211223102~sac/), I've got the trans brace from ben already.

i have an e34 oil pan but i personally wouldn't know if that's rear sump, haven't ordered the oil pump parts so no worries if I screwed up.

]]>https://wibimmers.com/post/82113https://wibimmers.com/post/82113Tue, 01 Aug 2017 22:55:47 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 22:51:35 GMT]]>Which trans are you using? I see the M20 flywheel. I am still extremely skeptical about all this nonsense people spout off online about the M20 flywheel hitting the block. Im not seeing it.

I see the upgraded oil pickup tube. Are you using a rear-sump oil pan?

]]>https://wibimmers.com/post/82112https://wibimmers.com/post/82112Tue, 01 Aug 2017 22:51:35 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 21:53:13 GMT]]>Spam-Can.jpg

]]>https://wibimmers.com/post/82111https://wibimmers.com/post/82111Tue, 01 Aug 2017 21:53:13 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 21:29:45 GMT]]>real talk though i'll stop shitting up the group chat and get my m50(b25tu) maintenance sorted out here.

currently todo:

  • head gasket
  • vanos seals, rattle repair kit (besians)
  • thermostat housing replacement
  • hydraulic alternator tensioner conversion
  • upgraded oil pump shaft (achilles)
  • reinforce oil pick-up (also achilles)

thermostat and water pump / pulley are replaced already.

am i missing anything big? motor has 140-160 on it iirc

]]>https://wibimmers.com/post/82110https://wibimmers.com/post/82110Tue, 01 Aug 2017 21:29:45 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 21:17:35 GMT]]>

MattY said:

another alpine sedan?? i'm out boys cya

With the Spam shoes.

]]>https://wibimmers.com/post/82109https://wibimmers.com/post/82109Tue, 01 Aug 2017 21:17:35 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 21:14:52 GMT]]>another alpine sedan?? i'm out boys cya

]]>https://wibimmers.com/post/82108https://wibimmers.com/post/82108Tue, 01 Aug 2017 21:14:52 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 21:12:58 GMT]]>Its already been done Matt. Better throw in the towel now before you spend more money.

MattsSPAM.jpg

]]>https://wibimmers.com/post/82107https://wibimmers.com/post/82107Tue, 01 Aug 2017 21:12:58 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 17:17:05 GMT]]>

straight6pwr said:

weds upside down is spam. you should tell people they are spam wheels.

Thanks Dan now I'll never unsee that haha

]]>https://wibimmers.com/post/82102https://wibimmers.com/post/82102Tue, 01 Aug 2017 17:17:05 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 17:10:48 GMT]]>weds upside down is spam. you should tell people they are spam wheels.

1.jpg

]]>https://wibimmers.com/post/82100https://wibimmers.com/post/82100Tue, 01 Aug 2017 17:10:48 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 01 Aug 2017 16:35:37 GMT]]>chris keeps bitching at me to update this thread even though the only thing i've done is spend money on parts. 

Just received my RHD M20 flywheel, looking shiny as ever:

IMG20170801095208.jpg

Using this guy alongside a brand new sachs kit from ECS. i REALLY like the stock e30 clutch so this should be amazing. also ordered a hydraulic alternator tensioner, aluminum thermostat housing, and completed my short shift setup with a turner shift arm bracket and a zhp knob. Stage one of the project is essentially getting the M50 reliability upgrades in, redo gaskets, and assembling the trans and shifter to get it all ready to drop in at once.

also i started assembling the weds. will be running these on the calypso for the time being, they'll be mounted shortly. bask in their glory:

Untitled-1.png

]]>https://wibimmers.com/post/82097https://wibimmers.com/post/82097Tue, 01 Aug 2017 16:35:37 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Thu, 25 May 2017 21:25:29 GMT]]>

GunMetalGrey said:

I wish I would have seen that you were having a driveshaft rebuilt. I have one sitting in the shop that I would have sold you for half of what you paid. 

my bad, i should've specified earlier!

]]>https://wibimmers.com/post/80028https://wibimmers.com/post/80028Thu, 25 May 2017 21:25:29 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 17:33:41 GMT]]>

Earl said:

But does it have a fresh black paint job? 

No, but it would have been a half priced core to send in to be rebuilt.

]]>https://wibimmers.com/post/79978https://wibimmers.com/post/79978Wed, 24 May 2017 17:33:41 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 17:26:38 GMT]]>But does it have a fresh black paint job?

]]>https://wibimmers.com/post/79975https://wibimmers.com/post/79975Wed, 24 May 2017 17:26:38 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 17:03:06 GMT]]>I wish I would have seen that you were having a driveshaft rebuilt. I have one sitting in the shop that I would have sold you for half of what you paid.

]]>https://wibimmers.com/post/79973https://wibimmers.com/post/79973Wed, 24 May 2017 17:03:06 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 16:13:40 GMT]]>Yeah, a lot of people have recommended their service to me so I thought I'd take advantage.

Also that car was at Schmidt's, they don't charge extra labor for moving stuff but they make you pre pay for the part you need pulled. They told me $100 for the driveshaft and $300 for the LSD, so I hopped right on that.

]]>https://wibimmers.com/post/79969https://wibimmers.com/post/79969Wed, 24 May 2017 16:13:40 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 15:22:09 GMT]]>If he is sending it where I think he is, the Texas shop is absolutely killer and their pricing is incredible=P

http://www.driveshaftspecialist.com/Import html/BMW.html

]]>https://wibimmers.com/post/79966https://wibimmers.com/post/79966Wed, 24 May 2017 15:22:09 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Wed, 24 May 2017 15:05:59 GMT]]>Did they want a deposit to move the car? I need to pull some under car parts there and have been avoiding it because I do not want to crawl in the mud.

Also what did you pay for a driveshaft and why are you sending it so far away? There are driveshaft specific shops in Madison..

]]>https://wibimmers.com/post/79962https://wibimmers.com/post/79962Wed, 24 May 2017 15:05:59 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Tue, 23 May 2017 22:59:02 GMT]]>Now that the calypso is running I can focus on this guy.

I sourced a manual driveshaft from this totaled 88 (will be sending to texas for a rebuild), as well as possibly a 3.25 LSD (VIN claims it does, waiting on confirmation). I know the optimal ratio for an M50 is a 3.46, but this guy should be close enough and the LSD is worth the trade off. I had them pull it out of the yard and get it up on its new throne, because screw getting under any car that's jacked up on wet mud.

186748751021255477092155357539602o.jpg1867515310212554770961554214376119o.jpg

The sedan is still down to the head on the M20, as the pull was put on pause to work on the Calypso subframe. Hopefully we can start up again on that soon.

]]>https://wibimmers.com/post/79949https://wibimmers.com/post/79949Tue, 23 May 2017 22:59:02 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Mon, 20 Mar 2017 17:10:17 GMT]]>

i_love_cars said:

  1. Plz find me a 2002 in a similar fashion

Last pristine 2002 I saw ran for like 20 grand pretty sure. I'll just keep reminding my dad of that, since his 2002 was his first car and didn't hold onto it

]]>https://wibimmers.com/post/77520https://wibimmers.com/post/77520Mon, 20 Mar 2017 17:10:17 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Mon, 20 Mar 2017 17:00:02 GMT]]>

Jdesign said:

One small detail I must point out though....

i have failed you and the sullied the repertoire of the M50 dynasty. Truly, I am not worthy.

]]>https://wibimmers.com/post/77519https://wibimmers.com/post/77519Mon, 20 Mar 2017 17:00:02 GMT<![CDATA[Reply to Hello. My name is Matt, and I like spending money on Mon, 20 Mar 2017 16:28:50 GMT]]>

Jdesign said:

Yissssss. Very nice. I like that you made an chart to keep yourself organized. That is the key to the beginning of a successful project in my opinion.  

One small detail I must point out though....

Capture.JPG

Damn I missed that. #Craigslistfail

]]>https://wibimmers.com/post/77516https://wibimmers.com/post/77516Mon, 20 Mar 2017 16:28:50 GMT