Looking for a good condition known working ZF power steering pump.    thanks.

Bassboy3313 said: I just opened my print file back up. Says that it used 32.09 meters (or approximately 95 grams) of filament to print. The filament spool I am using cost me $23 for 1kg. We all know that 1kg equals 1000 grams. So dividing $23 by 1000 grams gives you 0.02 cents per gram. Multiple that by the 95 grams and it cost me $2.19 to print this wrench. I'd say this juice was worth the squeeze for sure! Sounds like a new business!

Anyone have a pair of e30 (4x100) 3mm wheel spacers?

Looking for an E46 M3 Getrag 420G transmission with lower miles. SMG or 6MT doesn’t matter. Rebuilds/synchro replacements are not a thing on these transmissions and I’m desiring an improvement in shift quality. They are notoriously notchy (see European Car magazine excerpt below) but wouldn't mind trying throwing in a lower mileage unit to see how it feels. Certainly couldn’t hurt. [image: EAA51106-A5F1-4153-B5AF-D80F872B9A2F.thumb.png.92c1ba76368e19e80e35a081f0a15155.png]

I'll text you

Need some parts from each side. Let me know if you have a broken handle.

Looking for a clean grey e36 sedan headliner! Thanks

As title states, looking for a 2001-2005 E46 330i midpipe and possibly a factory catback. Unsure if the 325i uses the same one but if so, that would be fine

FYI 413 silvers are pretty much the same thing if you’re getting an aftermarket chip that disables EWS anyways

Boris3 said: I've got a full set of used m20 wires with loom, don't remember mileage but maybe somewhere in the 150k range? Might be OK for tracking down an issue. Otherwise I'd suggest just picking up a new set if yours are sketchy.    I'll send a PM. In addition to this, does anyone have the plug wire bracket? My tabs that mount it are broken. Looks like this: [image: image.png]

Much appreciated!  I'll contact the seller and see if they're up for the potential plan.

Boris3 said: If you need a small case to play with I’ve still got my old 4.10 open from the e30 318is. Thanks for that. I've also got an e21 3.90 open, but it might be nice to have an e30 diff to compare if I can't come up with some solid data online. I'll let you know.

Nick_F said: I put this in the wrong section, sorry about that I swear I can read... fixed!

Looking for an e36 rear subframe, anything from a 6 cyl car will work.

I have one with three holes (two window switches and one for the window breaker switch) if that would be of interest?

B C said: Just joshin’ bro, here ya go https://www.ebay.com/itm/AC-Schnitzer-Pedal-Set-Bmw-E30/153894908296?hash=item23d4d9f188:g:xo0AAOSwxDFekgkV Saw those earlier this week. They aren't genuine.

Up. Now I need some fogs

Looking for a few parts from an e46 M3. - fuel door - passenger fender - exterior door trim/rear quarter trim strips Non-M parts. - inside door sills that hold the carpet down (for a coupe)

If you want to go the full re-upholstery route, Ace Auto Trim in West Bend does good work.  They are old school.  Not even a website. [image: image.png]

I am looking for a seat slider/track assembly for an E30 seat. E36 may work as well.